Table of Contents
Advertisement
Function surfaces
Contact search
A
Dial a number in the telephone contact list (if a telephone contact contains
B
several telephone numbers, a menu containing the telephone numbers as-
signed to this contact is displayed after the contact is selected)
Display the contact details
C
Select the telephone number in the contact details
Edit the telephone number of the contact before dialling
Infotainment Amundsen:
The contact name can be read out by the Infotainment system's generated
voice
Open the menu for sending a text message (SMS)
Infotainment Amundsen:
Start the route guidance to the contact address
Import list
After the main telephone is connected to the Infotainment system for the first
time, the process for importing the telephone contacts into the device memo-
ry starts. The import can take several minutes.
The Infotainment system's telephone book contains 2000 free memory loca-
tions for imported telephone contacts. Each contact can contain up to 5 tele-
phone numbers.
The number of imported contacts can be determined in the menu item →
User profile → Import contacts: or. Import contacts being determined.
If an error occurs during the import, a corresponding message appears on the
screen.
Refresh list
When the telephone reconnects with the Infotainment system, the list is auto-
matically updated.
The list can be refreshed manually as follows.
In the main Telephone menu, tap the function surface → User profile → Import
▶
contacts: or tap on Import contacts
132
Infotainment
Management of preferred contacts (favourites)
Function surface for emergency call
If the vehicle is not equipped with the buttons for the Care Connect service
» page
16, the position of the first function surface in the first group of favour-
ites will show the function surface for an emergency call . In some coun-
tries, this function may not be available.
The function surface can be assigned a different number for the preferred
contact.
To restore the emergency number, it is necessary to remove the telephone
from the list of paired external devices
nect again.
Assigning favourites
›
In the main menu Telephone, tap on the desired function surface
›
Select the desired contact (if required, one of the contact numbers).
Connecting to a favourite
The function surfaces for preferred contacts allow you to dial the contact tele-
phone numbers immediately.
The favourites are provided in two storage groups.
›
To Change storage group, tap on the function surface
›
To dial, tap the assigned function surface
Changing allocated favourites
›
In the main Telephone menu, press and hold the desired function surface
» Fig.
147.
›
Select the desired contact (if required, one of the contact numbers).
Fig. 147
Favourite contacts
» page 130
and then to pair and con-
» Fig.
A
» Fig.
147.
B
» Fig.
147.
A
147.
A
Advertisement
Table of Contents
