Skoda RAPID 2017 Owner's Manual page 238

CAUTION
Before inserting the bulb holder into the light , check that the connector
■
» Fig. 277 is fitted correctly between the light and the bulb holder.
Make sure that when refitting the bulb holder into the light, the wiring har-
■
ness is not pinched - otherwise there is a risk of damage to the electrical
B
installation.
Replacing the bulbs in the rear lamp - Option 2
Fig. 278 Outer part of the lamp / removing the bulb / lamp holder

Read and observe and
Outer part of the lamp
›
Turn the holder with the bulb
A
›
Remove the socket with the bulb from the lamp housing in the direction of
arrow 2 .
›
Change the bulb.
›
Reinsert the holder with the bulb into the light housing and turn in the oppo-
site direction of the arrow to the stop.
1
Inner parts of the lamp
›
Unlock the bulb holder at the areas marked with arrows
move the bulb holder from the light.
›
Turn the respective light bulb counter-clockwise to the stop and remove it
from the bulb holder.
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
›
Insert the bulb holder in the tail lamp assembly. The holder must engage se-
curely.
236
Do-it-yourself
on page 231 first.
in the direction of arrow » Fig.
1
» Fig. 278
A
278.
and re-