Table of Contents
Advertisement
CAUTION
Do not take hold of the glass bulb with naked fingers (even the smallest
■
amount of dirt reduces the working life of the light bulb). Use a clean cloth,
napkin, or similar.
The cap of the filament bulb must always be seated correctly in the head-
■
light, otherwise this may allow water and debris to enter the headlight - risk of
damage to the headlights.
Note
We recommend that a box of replacement bulbs always be carried in the vehi-
cle.
Bulb arrangement in the halogen headlights
Fig. 269 Left headlight: Halogen headlight / halogen headlight with LED
daytime running lights
Read and observe
and
Bulb arrangement
» Fig. 269
Low beam
A
Main beam, separate daytime running lights, and parking light
B
Flashing
C
Main beam
D
232
Do-it-yourself
on page 231 first.
Replace bulb for main beam, daytime running lights and parking
light (halogen headlight)
Fig. 271 Change the light bulb for the parking light
Read and observe
and
Removing/inserting the bulb for main beam and separate daytime running
lights
›
Remove the protective cap
B
›
Turn the holder with the bulb in the direction of the arrow
›
Remove the holder with the bulb in the direction of arrow
›
Replace the bulb in the holder.
›
Insert the holder with the new bulb into the headlight in the opposite direc-
tion to the arrow
.
2
›
Turn the holder with the new bulb in the opposite direction to the arrow
until it stops.
›
Fit the protective cap
» Fig. 269
B
Removing/inserting the bulb for the parking light
›
Remove the protective cap
B
Fig. 270
Replacing the bulb for main
beam and separate daytime run-
ning lights
on page 231 first.
» Fig. 269
on page 232.
» Fig.
1
.
2
on page 232.
» Fig. 269
on page 232.
270.
1
Advertisement
Table of Contents
