Table of Contents
Advertisement
Storage compartments in the luggage compartment
Fig. 111 Remove the tray cover on the left / right
Read and observe
and
The storage compartments with removable covers are designed for storing
small objects of up to 1.5 kg. in weight in total.
›
To remove, grasp the top part of the cover and remove in the direction of
the arrow
» Fig.
111.
CAUTION
When handling the storage compartment cover, ensure that it and/or the lug-
gage compartment trim is not damaged.
Cargo elements
Fig. 112 Removing cargo elements / example on how to mount the load
by means of the cargo element
on page 84 first.
Read and observe
and
The cargo elements are designed for mounting and securing loads with a maxi-
mum gross weight of 8 kg.
›
Before use, remove the Cargo elements in the direction of the arrows
» Fig. 112
- .
›
Use the cargo elements to secure the load as close as possible to the rear
seats
» Fig. 112
.
›
After use, stow the Cargoelements in their original position.
Class N1 vehicles
Read and observe
and
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1 - 4) must be used for fastening the
load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.
Transportation on the roof rack
Fig. 113 Attachment points
The attachment points
and
A
B
» Fig.
113.
Mounting and dismounting of the roof bars is carried out according to the in-
structions provided.
on page 84 first.
on page 84 first.
are located on both sides of the vehicle
Transport of cargo
87
Advertisement
Table of Contents
