Table of Contents
Advertisement
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
» Fig.
271.
1
›
Hold the housing containing the bulb in area
›
Remove the faulty bulb from the housing in the direction of the arrow
›
Insert a new bulb in the housing until it stops.
›
Insert the housing with bulb into the headlight again.
›
Fit the protective cap
» Fig. 269
B
Changing the bulb for the low beam
Fig. 272 Changing the bulb for the low beam
Read and observe
and
›
Remove the protective cap
A
›
Disconnect the connector with the light bulb in the direction of arrow
» Fig.
272.
›
Remove the connector with the bulb in the direction of arrow
›
Remove the connector.
›
Plug the connector into the new bulb so that the fixing lug
points upwards.
›
Insert the connector, with the bulb, into the headlight opposite to the direc-
tion of arrow
until you feel it lock into place.
2
›
Fit the protective cap
» Fig. 269
A
.
A
on page 232.
on page 231 first.
» Fig. 269
on page 232.
2
A
on the bulb
on page 232.
Changing the bulb for the front turn signal light
.
2
Read and observe
›
Turn the holder with the bulb in the direction of the arrow
›
Remove the holder with the bulb in the direction of arrow
›
Replace the bulb in the holder.
›
Insert the holder with the new bulb into the headlight in the opposite direc-
tion to the arrow
›
Turn the holder with the new bulb in the opposite direction to the arrow
until it stops.
Replace the bulb for the main beam (halogen headlight with LED
daytime running lights)
1
.
Fig. 274 Changing the bulb for the main beam
Read and observe
›
Remove the protective cap
Fig. 273
Changing the bulb for the front
turn signal light
and
on page 231 first.
.
2
and
on page 231 first.
» Fig. 269
on page 232.
D
Fuses and light bulbs
1
» Fig.
273.
.
2
1
233
Advertisement
Table of Contents
