Simultaneous Monitoring From Multiple Programming Tools - Mitsubishi L02CPU User Manual

3.22.1

Simultaneous monitoring from multiple programming tools

Creating a user setting system area allows high-speed monitoring from multiple programming tools (Setting a
monitoring file for the host station is not required).
Programming tool
However, since the system area is stored in the program memory, the storage area is reduced by the system area size.
(1) Creating a user setting system file
1.
Open the "Format PLC Memory" dialog box.
[Online]
2.
Select "Program memory/Device memory" in "Target Memory".
3.
Select "Create a user setting system area" in the "Format Type" area.
The number of programming tools that can simultaneously monitor a CPU module is the number of user
setting system areas +1.
4.
Set the number of steps for the system area (in increments of: 1K step).
Up to 15K steps can be set for the system area. 1K step is available for a monitoring file from another
station.
Monitoring target
[PLC Memory Operation]
CHAPTER 3 CPU MODULE FUNCTIONS
Programming tool
[Format PLC Memory]
3
143