Mitsubishi L02CPU User Manual page 218

(6) Buffer memory monitor
The start I/O No., buffer memory address, display format, buffer memory value, and bit status of the buffer
memory value of the specified module can be monitored.
Start I/O number of a module to be monitored
Bit position counted from the
specified buffer memory address
The description of displayed items is the same as that of the device monitor.(
(7) Buffer memory test
A buffer memory value can be changed.
"Buffer memory monitor" screen
"Buffer memory test value check" screen
Since the value displayed in the "buffer memory test value check" screen is used for testing, if the relevant buffer memory is
being used in a program, the displayed value may differ from the one set in the "buffer memory test" screen.
216
On/off status of bits
ON :
OFF:
↓
A buffer memory address to be monitored can be changed
by 1 word with the and buttons.
1.
Press the button.
OK
2.
Select the target address using the
buttons and press the
moves to the buffer memory value. Increase or
decrease the value using the
3.
Pressing the button will update the value set in
OK
buffer memory test.
Display format
Buffer memory value
Page 192, Section 4.2.1 (5))
and
button. The cursor
OK
and buttons.