2.8.4
Fixed scan execution type program
Fixed scan execution type program is a program executed at specified time intervals. This type of programs,
unlike interrupt programs, can be interrupted in units of files without interrupt pointers or the IRET instruction. For
the restrictions on programming, refer to
The restrictions on programming are the same as those for interrupt programs.
Fixed scan interval
END processing
Scan execution
type program
Fixed scan execution
type program
To execute a fixed scan execution type program, execute the EI instruction in the initial execution type program or scan
execution type program to enable interrupts.
66
Page 54, Section 2.7 (2).
Condition
Condition
established
established