Mitsubishi L02CPU User Manual page 192

(4) Display format
The following table shows display format available for device monitor/test.
Format
16-bit integer
32-bit integer
Real number
(single precision)
Real number
(double precision)
*1 Device test cannot be executed while a value is displayed in real number. (except for bit device, timer (T), retentive timer
(ST), and counter (C))
Also, a device number can be displayed with device comment.
(a) Specifying display format
Perform the following operation.
"Device monitor" screen
"Display format selection" screen
190
Numeric
Bit display
value
Decimal
Available
Hexadecimal
Decimal
Hexadecimal
Not available
*1
−
*1
↓
A sign is appended for negative values only.
When a value is less than four digits, "0" is assigned for the remaining digits.
A sign is appended for minus values only.
When a value is less than eight digits, "0" is assigned for the remaining digits.
A value is displayed in floating point exponent (2 lines). A sign is appended for
negative values only.
A value is displayed in floating point exponent (2 lines). A sign is appended for
negative values only.
1.
Press the button.
2.
Select display format using the
and press the
OK
Remarks
and
button.
buttons