Mitsubishi L02CPU User Manual page 291

(3) PLC File Setting
Parameters required for the files used in the CPU module are set.
Parameter
Item
No.
1100
File Register
Transfer to Standard
1104
ROM at Latch data
backup operation
Comment File Used in a
1101
Command
1102
Initial Device Value
1103
File for Local Device
File used for SP.DEVST/
1105
S.DEVLD Instruction
Description
Set a file for the file register used in the
H
program.
Select whether to batch-transfer the
data in the file register at the time of
H
latch data backup to the standard ROM.
Set a file for device comments used in
H
the program.
Set a file for initial values of the devices
H
used for the CPU module.
Set a file for local devices used in the
H
program.
Set a device data storage file used for
writing to or reading from the standard
H
ROM.
Setting range
• Not used Use the following
• Use the following file file
Selected/deselected
• Not used
• Use the same file name as
Not used
the program
• Use the following file
• Not used
• Use the same file name as
Not used
the program
• Use the following file
• Not used
Not used
• Use the following file
• Not used
Not used
• Use the following file
APPENDICES
APPEN
Default Reference
Page 259,
Section 5.6
Page 159,
⎯
Section 3.27
⎯
Page 85,
Section 3.5
Page 278,
Section 7.2
Page 164,
Section 3.28
289
DIX