Mitsubishi L02CPU User Manual page 196

(f) Monitoring a real number (double precision)
The specified device, and display format and a value of the specified device can be monitored.
*1 If the device value is "-0", unnormalized number, nonnumeric character, or ± ###, "********" is displayed.
*2 When a bit device is monitored, the device value is displayed in 16-bit integer (decimal).
(g) Monitoring a bit device in decimal
The specified device and bit status of the specified device can be monitored. Regardless of display format, a
screen with the following style appears.
(h) Monitoring timer (T), retentive timer (ST), and counter (C)
The specified device and a value and bit status of the specified device can be monitored. The current value is
displayed in decimal or hexadecimal, the format specified in the "display format selection" screen. When
"REAL" has been specified, the current value is displayed in decimal.
On/off status of bits
ON :
OFF :
194
The device number can be changed by 1 word (16 bits)
with the and
The device number can be changed by 10 bits
with the and buttons.
The device number can be changed by1 word (16 bits)
with the
Coil
Contact
Current value
*2
buttons.
Display format
Device value in exponent
Display format and a device
value are not displayed.
and buttons.
*1
Display format is not displayed.