Mitsubishi L02CPU User Manual page 179

(2) Execution method
The following two methods are available for restoring backup data.
• Remote operation
• Automatic restoration
(a) Execution by remote operation
Open the "Restoration execution from backup data" dialog box.
[Online]
To validate restored data, click "Yes" in the screen that appears after clicking the
above dialog box and then power on or reset the CPU module.
(b) Execution by automatic restoration
On the "CPU Module Change Setting" dialog box, select "Auto restore at turn OFF −> ON or reset".
( Page 170, Section 3.30.1 (2)(a))
After backup, turn off and then on or reset the CPU module so that restoration starts. Restoration timing can be
set from either once at the first time or every time.
Option setting item
Restore for the first time only
Restore every time
[PLC Module Change] [Restore...]
Turn on from off or reset of the CPU module
First time
Restoration executed Restoration not executed (Operate as a standard SD memory card)
Restoration executed Restoration executed
CHAPTER 3 CPU MODULE FUNCTIONS
button in the
Second time or later
3
177