Mitsubishi L02CPU User Manual page 129

(c) Online change to the CPU module where the executional conditioned device test
setting has been registered
For the online module change (ladder): if any executional conditioned device test setting has been registered in
the ladder block that is to be changed online, the CPU module disables the corresponding setting.
Step numbers of registrations 1 to 3 are specified in the executional conditioned device test settings. When
Ex. Ex.
the ladder block including the registration 2 is changed online, the registration 2 is disabled. Since the
registrations 1 and 3 are not included in the change target program, they are not disabled.
Registration 1
Registration 3
When multiple ladder blocks are to be changed online, ladder blocks between the change target ladder
Ex. Ex.
blocks are included in the change target. In the following example, registrations 1 to 3 are all disabled.
Registration 1
Registration 3
*The shaded areas are ladder blocks to be changed online.
When a ladder block is to be added online, the executional conditioned device test setting included in the
Ex. Ex.
ladder block followed after the added ladder block is disabled.
Registration 1
Registration 2
Registration 3
For the online change (files), all executional conditioned device test settings registered to the target program
are disabled.
Registration 2
*The shaded area is a ladder block to be changed online.
Registration 2
*The shaded area is a ladder block to be changed online.
CHAPTER 3 CPU MODULE FUNCTIONS
3
127