Mitsubishi L02CPU User Manual page 133

(4) Setting method
1.
Open the "Sampling Trace" dialog box.
[Debug]
2.
On the "Sampling Trace" window, open a dialog box to configure a setting.
[Debug]
Item
Setting of
Executing and
Saving
Trace Setting
Condition
Setting
(a) Trace Execution Method
• Execute after current trace setting overwrite to PLC:
The CPU module executes the sampling trace after the trace settings are overwritten to the existing
sampling trace file.
• Execute by setting trace that writing in PLC:
The CPU module executes the sampling trace with the trace settings in the sampling trace file selected for
storage.
[Sampling Trace] [Open Sampling Trace]
[Sampling Trace] [Trace Setting...]
Trace Execution Method
Trace Data (setting + result) Storage
Trace Auto Startup Setting
Trace Count Setting
Additional Information
Data Acquisition Timing Setting
Trigger Condition Setting
CHAPTER 3 CPU MODULE FUNCTIONS
Description
Set the execution method of the trace.
Select a file name of the trace data.
Set whether to start the sampling trace automatically when the
CPU module is powered off and then on.
Set the number of traces to perform.
Set whether to add clock data and program name to the sampling
trace file.
Set the timing of data acquisition.
Select the condition to activate a trigger.
3
Reference
(a)
⎯
⎯
(b)
⎯
(c)
(d)
131