Fw Update Tool Messages: Error - Ricoh RN-MF2 Field Service Manual

5. System Maintenance Reference
Messages
Eng FW version: Update Eng
FW
Firmware is Updating...
Eng Firmware is Updating...
FW Update Done. *** Please
reboot the Machine.***

FW Update Tool Messages: Error

Message for USB update
Messages
Machine is not ready.
Wrong Model.
Machine is busy.
FW Update Done. *** Please
reboot the Machine.***
Machine loses communication.
***Please check FW Update
Done. Then reboot the
Machine.***
132
Comment
Engine FW is transmitting
AIO FW is updating
Engine FW is updating
F/W update is completed.
Comment
Can not get MFP status form USB
status channel before F/W file is
transmitted.
F/W file is not matched for current
machine.
F/W update is running.
Other MFP functions are running.
F/W update is completed.
F/W file has transmitted. Polling
F/W update progress fail.
Action
Not available
Not available
Not available
Please reboot the Machine.
Action
Check USB cable connection.
Check USB Print Driver if it is
available.
Do not update F/W when
MFP is in power-on stage.
Please check the version of
F/W file and machine if it is
suitable for MFP.
Please wait F/W update is
completed.
Please wait other MFP
functions are completed.
Please reboot the Machine.
Do not reboot engine till
Engine Panel display
"Firmware Update Done.
Please reboot". Then reboot
engine.