Related Parameters, Control Data And Monitor Data - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
8.3.4

Related parameters, control data and monitor data

Item
Positioning parameter
Maximum speed
FLS/RLS signal
selection
External signal
selection
FLS/RLS signal
logic
Control data
Forward rotation
limit (LSF)
Operation
command 1
Reverse rotation
limit (LSR)
Pulse generator magnification
(numerator)
Pulse generator magnification
(denominator)
Monitor data
Current address (user)
Current address (pulse)
Manual pulse generator current input
value
Manual pulse generator input
frequency
*1. For the user units, refer to the following.
74
BFM number
X-axis
BFM #14009,#14008 BFM #14209,#14208
BFM #14044 b0 BFM #14244 b0
BFM #14044 b8 BFM #14244 b8
BFM #518 b2 BFM #618 b2
BFM #518 b3 BFM #618 b3
BFM #525,#524 BFM #625,#624
BFM #527,#526 BFM #627,#626
BFM #1,#0 BFM #101,#100
BFM #3,#2 BFM #103,#102
BFM #13,#12 BFM #113,#112
BFM #15,#14 BFM #115,#114
8.3 Manual pulse generator operation
Y-axis
Setting range:1 to 2,147,483,647(user units)
OFF: The FLS/RLS signal of the servo amplifier is
not used.
ON : The FLS/RLS signal of the servo amplifier is
used.
OFF: The NO contact the FLS/RLS signal logic of the
servo amplifier.
ON : The NC contact for the FLS/RLS signal logic of
the servo amplifier.
The 20SSC-H decelerates to stop at this parameter
ON during forward rotation output
The 20SSC-H decelerates to stop at this parameter
ON during reverse rotation output
Specify the magnification for input pulses.
Setting range: 1 to 1,000,000
Specify the dividing rate for input pulses.
Setting range: 1 to 1,000,000
-2,147,483,648 to 2,147,483,647
*1
(user unit)
-2,147,483,648 to 2,147,483,647PLS
-2,147,483,648 to 2,147,483,647PLS
The sign is positive (+) for an increasing count, while
the sign is negative (-) for a decreasing count.
8 Manual Control
Description
*1
→ Refer to Section 7.7