Input Cable And Terminal Block - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
5.1.3

Input cable and terminal block

The cable for connecting the 20SSC-H input connector with external devices is described.
1. Input connector
The input connector of 20SSC-H complies with MIL-C83503.
Procure the input cable while referring to the following.
1) Applicable connector (commercially available connectors)
Use the 20-pin (1-key) socket complying with MIL-C-83503.
Check in advance for interference with peripheral parts such as the connector cover.
2) Input cable (by Mitsubishi Electric)
Model name
*1
FX-16E- CAB
*1
FX-16E- CAB-R
FX-16E-500CAB-S
*1. indicates the cable length.
150 : 1.5m, 300 : 3m, 500 : 5m
3) Applicable connector for user cable (by Mitsubishi Electric)
The users should prepare the electric wires and pressure crimp tool.
Model name and configuration of I/O connector
Our model name
For flat FX
cable CON
FX
CON-S
For united
cable
FX
CON-SA
4) Applicable connectors (commercially available connectors)
DDK Ltd. connector specified in Item (3) above and Matsushita Electric Works connector specified in the
table below.
Model name of connector
Housing
Contact
Cover
2. Terminal block
1) Terminal block (our option)
For the specification and internal circuit of the terminal block, refer to the following respective PLC
manual.
Model name
FX-16E-TB
2) Terminal layout of FX-16E-TB connected to input connector
Y-START X- A+
X-START X-INT0 X-INT1
*1. The S/S terminal is connected inside FX-16E-TB.
Cable length
1.5, 3, 5m
5m
Description of part
(Made by DDK Ltd.)
2C -I/O- Set of 10 Crimp connector
pieces FRC2-A020-30S
-I/O- Housing HU-200S2-001
2C
Set of 5
Crimp contact HU-411S
2C -I/O- Housing HU-200S2-001
Set of 5
Crimp contact HU-411SA
Applicable cable (UL-1061 recommended)
AXW1204A
AXW7221
AXW62001A
→ Refer to the FX3
Converts input connector to terminal block
→ For the pin array of the input connector, refer to Subsection 3.5.1
X- B+ X-DOG
S/S *1
S/S *1 X- A-
X- B-
5.1 Cable to Be Used, Applicable Connector and Wire Size
Flat cable (with tube) provided with a 20-pin connector at both ends
Round multi-conductor cable provided with a 20-pin connector at both ends
Bulk cable with 20-pin connector provided on a single end (cable color: red)
Applicable cable (UL-161 recommended) and tool
Wire size
AWG28 (0.1mm
1.27 pitch 20
conductors
AWG22 (0.3mm
AWG20 (0.5mm
AWG22(0.3mm 2 )
AWG24(0.2mm 2 )
→ Refer to the FX
Hardware Edition (Japanese document only)
UC
Application and remarks
S/S *1 Y- A+
S/S *1 Y-INT0 Y-INT1
S/S
Remarks
Crimp tool
(Made by DDK Ltd.)
2 )
357J-46740: Main body
357J-4664N: Attachment
2 ) 357J-5538
2 357J-13963
)
Crimp tool
AXY52000
Hardware Edition
3U
Y- B+ Y-DOG
S/S *1
*1 Y- A- Y- B- S/S *1
5 Wiring
1
2
3
4
5
6
7
8
9
S/S *1
10
27