Cable To Be Used, Applicable Connector And Wire Size; Sscnet Iii Cable; Power Supply Cable - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
WIRING PRECAUTIONS
• If the adhesion of solvent and oil to the code part of SSCNET III cable may lower the optical characteristic and machine characteristic.
If it is used such an environment, be sure to do the protection measures to the optical cord.
• When storing, put a cap on the connector part for preventing the connector edge of SSCNET III from getting dirt, dust and so on.
• SSCNET III connector is put a cap to protect light device inside connector from dust.
For this reason, do not remove a cap until just before mounting SSCNET III cable.
Then, when removing SSCNET III cable, make sure to put a cap.
• Keep the cap for SSCNET III connector and the tube for protecting light code end of SSCNET cable in a plastic bag with a zipper of
SSCNET III cable to prevent them from becoming dirty.
• When changing the servo amplifier or 20SSC-H, make sure to put cap on SSCNET III connector. When asking repair of servo
amplifier for some troubles, make sure to put a cap on SSCNET III connector.
When the connector is not put a cap, the light device may be damaged at the transit.
In this case, exchange and repair of light device is required.
5.1

Cable to Be Used, Applicable Connector and Wire Size

5.1.1

SSCNET III cable

The SSCNET III cable for connecting 20SSC-H with the servo amplifier is described.
Model
*1
MR-J3BUS M
*1
MR-J3BUS M-A
*1
MR-J3BUS M-B
*1. indicates the cable length.
015 : 0.15m, 03 : 0.3m, 05 : 0.5m, 1 : 1m, 3 : 3m, 5 : 5m, 10 : 10m, 20 : 20m, 30 : 30m, 40 : 40m,
50 : 50m
5.1.2

Power supply cable

The cable for connecting the 20SSC-H power supply connector with the power supply is described.
Model name
FX -100MPCB
2NC
Preparing the power cable by yourself
To prepare the power cable by yourself, use the following wiring material and connector.
Wire size
Crimp terminal
Housing
26
Cable length
0.15, 0.3, 0.5, 1, 3m
5, 10, 20m
30, 40, 50m
Length
1m Accessory of 20SSC-H
For main unit, 20SSC-H
For input extension block
5.1 Cable to Be Used, Applicable Connector and Wire Size
Operating temperature
Flex Lif
range
Standard
-40 to 85 °C
(-40 to 185 °F)
Standard
-20 to 70 °C
Long flex
(-4 to 158 °F)
Remarks
Specifications/model name
AWG 24(0.2mm2)
50083-8014 (Manufactured by Molex Incorporated)
51030-0330 (Manufactured by Molex Incorporated)
51030-023 (Manufactured by Molex Incorporated)
5 Wiring
Application and remarks
For standard in-panel cable
For standard external cable
For long distance cable