Program Download - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

SOFTWARE UPDATE

5.4.2 SOFTWARE UPDATE PROCEDURE: B064 SERIES

IC (PCMCIA/CIA) cards are used to update the software and to back up important

data. Here is a list of the items that can be updated or restored from an IC card:

• BCU software

• GW controller software

• LCDC (operation panel) software

• Language software

• Scanner (DIMM) software

• PHY: NCS (NIB) software

• PHY: NFA (NetFile) software

• Stamp data

• NVRAM software

First, install the BCU software, then the GW controller software, then the others

can be upgraded in any order.

Here are some important points to keep in mind when handling and using IC cards.

• Never insert or remove a IC card with the machine power switched on.

• Never switch the power off while the machine is downloading data from an IC

• The IC card is a precision item so handle it carefully. Never store the card in a

location subject to high temperature, high humidity, or direct sunlight.

• Never bend the card, scratch it, or subject it to strong shock or vibration.

If an error occurs during downloading, an error code appears. For full details on

these error codes and how to recover the machine, see 'Troubleshooting –

Program Download' (Section 4.1).

B064 Series/B140 Series

/B246 Series/D052 Series

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

Chapters

Table of Contents

B246 series B140 series D052 series