ADF
Changing the Default Selection with SP6016 and SP5126
Here is a list of paper sizes that can be set to default, to enable detection. The
bold sizes are the default settings, and the italic sizes are the alternate settings.
North America
64
DL SEF
32
LT LEF
16
LT SEF
8
LG SEF
To change the default settings:
1. Enter the SP mode.
2. Select SP6016.
3. Replace the default settings with these alternate settings:
• In North America, enter 120 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
• In Europe (or Asia), enter 7 to replace the default settings with the alternate
settings. The bold settings in the table above are replaced with the italicized
settings.
4. To restore all the default settings in either North America or Europe/Asia, enter
"0".
SP 5126
This SP controls the alternative paper sizes that are detected for LG SEF (USA) or
8 ½ x 13" (Europe/Asia).
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
11" x 15"
Exec LEF
8" x 10" SEF
Set by SP 5126
6-24
CÓPIA NÃO CONTROLADA
Europe/Asia
4
8 K
2
16 K SEF
1
16 K LEF
DL SEF
LT SEF
LT LEF
SM