Rev. 04/2008
ACCESSORY CHECK
Check the accessories and their quantities against this list:
Description
1. File Format Converter Board ................................................. 1
2. MLB bracket........................................................................... 1
3. MLB panel.............................................................................. 1
4. Screw M3 x 6 ......................................................................... 2
Installation Procedure
CAUTION
Unplug the main machine power code before you start this procedure.
Installing the Firmware
⇒
1. Remove the rear cover ( x 2).
2. Remove the controller cover ( x 10).
3. Push DIP SW2-1
board to the UP position (ON).
4. Install these firmware modules.
• GW Controller (System and Copy)
• Printer/Scanner
• NIB Netfile
5. Turn off DIP SW2-1 on the controller
board.
6. Install these firmware modules.
• BCU
• LCDC
SM
CÓPIA NÃO CONTROLADA
on the controller
1-153
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B064 SERIES
Q'ty
SW 3
SW 2
ON
ON
ON
1 2 3 4
1 2 3 4
1 2 3 4 5 6 7 8
B064 Series/B140 Series
/B246 Series/D052 Series
SW 1
G148R158.WMF