Resets - Ricoh B064 SERIES Service Manual

RESETS

5.2 RESETS
5.2.1 MEMORY ALL CLEAR: SP5801
Before shipping, the SP mode data settings are printed in an SMC Report and
attached to the exposure glass of the machine for your reference. Store this
report in a safe place (next to the toner collection bottle, for example). It is a
list of all the SP initial settings. Refer to this list if you need to initialize one or more
SPs. The initial SP settings are also written in the SP mode tables at the end of this
section.
As a rule, you should always print an SMC Report before initializing or adjusting
the SP settings. The SMC Report provides a concise list of all the SP commands
and their current settings. The report can be used for reference if the service
manual is not available.
Executing Memory All Clear resets all the settings stored in the NVRAM to their
default settings except the following:
SP7003-001 (B064)
SP8381 (B140)
SP5811-001:
SP5907:
1. Execute SP5990 to print out all SMC Data Lists.
2. Open SP mode 5801.
3. Press the number for the item that you want to initialize. The number you select
determines which application is initialized. For example, press 1 if you want to
initialize all modules. (See the next few pages for series-specific items tables)
4. Press Execute, then follow the prompts on the display to complete the
procedure.
5. Make sure that you perform the following settings:
• Execute SP2115 – Laser Beam Pitch Adjustment
• Do the printer and scanner registration and magnification adjustments
( 3.14).
• Do the touch screen calibration (
• Referring to the SMC data lists, re-enter any values, which had been
changed from their factory settings.
• Execute SP3001-002 – ID Sensor Initial Setting
6. Check the copy quality and the paper path, and do any necessary adjustments
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
Electrical total counter value
Machine serial number
Plug & Play Brand Name and Production Name Setting
3.15).
5-6
CÓPIA NÃO CONTROLADA
SM