Auto Off Mode - Ricoh B064 SERIES Service Manual

ENERGY SAVER MODES

6.14.4 AUTO OFF MODE

Auto off mode is used only if no optional printer/scanner unit is installed.
Entering auto off mode
The machine enters auto off mode when one of the following is done.
• The auto off timer runs out after the last job (User Tools – System Settings –
Timer Setting – Auto Off Timer: default setting is 90 min)
• The operation switch is pressed to turn the power off
What happens in auto off mode
When the machine enters auto off mode, the main power switch turns off
automatically. The fusing lamp and all dc supplies except +5VE (+5V for energy
saver mode) turn off.
Returning to stand-by mode
The machine returns to stand-by mode when the main power switch is turned on.
Operation Energy
Switch Saver LED
Off Off
Disabling auto off mode
If the user wishes to disable auto off mode, use the following user tool: User Tools
– System Settings – AOF (change the setting to "OFF").
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
Approx.
Fusing Temp. Recovery
Room Temp.
(Fusing lamp off)
6-140
CÓPIA NÃO CONTROLADA
System
+5V
Time
300 s
Off
Note
Only +5VE is
supplied to the BICU.
SM