DRUM UNIT
3.6.11 CLEANING BRUSH
[C]
OPC drum (
3.6.5)
Drum cleaning blade (
[A]: Coupling ( x 1)
[B]: Inner bushing
[C]: Cleaning brush
• Pull the shaft toward the rear to disengage the front of the shaft, then pull
out.
NOTE: 1) After replacing the cleaning brush, clean the ID sensor to make sure that
it is clean and free of toner.
2) Avoid touching the cleaning brush with bare hands.
3) Check the entrance seals and confirm that they are not bent.
B064 Series/B140 Series
/B246 Series/D052 Series
CÓPIA NÃO CONTROLADA
3.6.10)
3-42
CÓPIA NÃO CONTROLADA
[B]
B246R954.WMF
[A]
SM