Ricoh B064 SERIES Service Manual page 263

Rev. 01/2007
5. Do these communication switch settings:
SP1104-23 (Switch 16)
6. Exit the Service Mode and cycle the machine off/on with the main power switch.
7. Do SP5990-001 to print the system parameter list, then confirm that "G3" is
listed as an option.
8. Enter the Service Mode and set the items required for PSTN communication.
If one G3 line is installed, use SP3103 (PSTN-1 Port Settings) to do the PSTN
settings.
If two G3 lines are installed, use SP3103 (PSTN-1 Port Settings) and SP3104
(PSTN-2 Port Settings) to do the PSTN settings for the first and second G3 line.
SM
CÓPIA NÃO CONTROLADA
Set Bit 1 "1".
Set Bit 3 "1" if two G3 boards are
installed.
1-223
CÓPIA NÃO CONTROLADA
MFP OPTIONS: B246/D052 SERIES
B064 Series/B140 Series
/B246 Series/D052 Series