By-Pass Separation Roller Pressure Adjustment - Ricoh B064 SERIES Service Manual

Hide thumbs Also See for B064 SERIES:

Table of Contents

3.11.13 BY-PASS SEPARATION ROLLER PRESSURE

1. Loosen the separation roller gear [A].

The position of the drive gear for the separation roller can be changed in order

to change the amount of pressure exerted by the separation roller. This

adjustment can be done:

• When feeding special paper, especially thick paper.

• When the customer experiences feed problems.

NOTE: The separation roller gear is positioned at the groove before shipping.

2. Move the separation roller gear right to increase the pressure to correct

B064 Series/B140 Series

/B246 Series/D052 Series

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

B246R1093.WMF

Chapters

Table of Contents

B246 series B140 series D052 series