Mercedes-Benz SL SERIES Operator's Manual page 86

SmartKey
84
To deactivate: press the & button on
X
the SmartKey twice in rapid succession.
The battery check lamp (
SmartKey flashes twice briefly and lights up
once, then KEYLESS-GO is deactivated.
To activate: press any button on the
X
SmartKey or insert the SmartKey into the
ignition lock.
KEYLESS-GO and all of its associated fea-
tures are available again.
Changing the settings of the locking
system
You can change the settings of the locking
system. This means only the driver's door, the
lockable stowage compartments in the vehi-
cle interior and the fuel filler flap are unlocked
when the vehicle is unlocked. This is useful if
you frequently travel on your own.
To change the setting: press and hold
X
down the % and & buttons simulta-
neously for about six seconds until the bat-
tery indicator lamp flashes twice
( page 85).
Y
i
If the setting of the locking system is
changed within the signal range of the vehi-
cle, pressing the & or % button:
locks or
R
unlocks the vehicle
R
The SmartKey now functions as follows:
To unlock: press the % button once.
X
To unlock centrally: press the % but-
X
ton twice.
To lock centrally: press the & button.
X
The KEYLESS-GO function is changed as fol-
lows:
page 85) of the
Y
X
X
X
X
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey, use the
mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid, the
anti-theft alarm system will be triggered
(
There are several ways to turn off the alarm:
X
or
X
or
X
or
X
To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
To unlock centrally: touch the inner sur-
face of the front-passenger door handle.
To lock centrally: touch the outer sensor
surface on one of the door handles.
To restore the factory settings: press
and hold down the % and & buttons
simultaneously for approximately six sec-
onds until the battery check lamp flashes
twice ( page 85).
Y
Mechanical key
page 80).
Y
To deactivate the alarm with the key:
press the % or & button on the key.
Insert the SmartKey into the ignition lock.
To deactivate the alarm with KEYLESS-
GO: press the Start/Stop button in the igni-
tion lock. The SmartKey must be in the
vehicle.
Lock or unlock the vehicle using KEYLESS-
GO. The SmartKey must be outside the
vehicle.