Mercedes-Benz SL SERIES Operator's Manual page 193

because of its narrow width. The distance to
the vehicle in front will be too short.
Obstructions and stationary vehicles
DISTRONIC PLUS does not brake for obsta-
cles or stationary vehicles. If, for example, the
detected vehicle turns a corner and reveals
an obstacle or stationary vehicle, DISTRONIC
PLUS will not brake for these.
Crossing vehicles
DISTRONIC PLUS may mistakenly detect
vehicles that are crossing your lane. Activat-
ing DISTRONIC PLUS at traffic lights with
crossing traffic, for example, could cause
your vehicle to pull away unintentionally.
Driving systems
HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
when pulling away, especially on steep
R
slopes
when maneuvering on steep slopes
R
when waiting in traffic
R
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
Important safety notes
G WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
there is a malfunction in the system or in
R
the voltage supply.
the HOLD function has been deactivated by
R
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
the electrical system in the engine com-
R
partment, the battery or the fuses have
been tampered with.
the battery is disconnected
R
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
! If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations.
To prevent damage to the vehicle, deacti-
vate DISTRONIC PLUS and the HOLD func-
tion in the following or other similar situa-
tions:
when towing the vehicle
R
in the car wash
R
Deactivate the HOLD function (
191
page 192) .
Y
Z