Mercedes-Benz SL SERIES Operator's Manual page 352

Navigation
350
To show the menu: press W the COMAND
X
controller.
Select RPT in the navigation system menu
X
bar by turning cVd the COMAND control-
ler and press W to confirm.
Switching navigation announcements
on/off
To switch off: press the 8 button dur-
X
ing an announcement.
You will briefly see the message:
driving instructions have been
muted.
To switch on: press W the COMAND con-
X
troller.
Select RPT in the navigation system menu
X
bar by turning cVd the COMAND control-
ler and press W to confirm.
i
COMAND automatically switches the nav-
igation announcements back on when:
you have a new route calculated
R
you switch COMAND on again or start the
R
engine
Switching announcements and audio
fadeout on/off
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Announcements
X
confirm.
A menu appears.
You can activate/deactivate the following
functions:
Announce Street Names
R
Street names are announced during
route guidance.
Audible Info During Phone Call
R
During a phone call, navigation
announcements and traffic reports are
audible in the background.
Audio Fadeout
R
The
and press W to
The volume of an active audio or video
source is automatically reduced during a
navigation announcement.
Gas on Reserve
R
Once you have reached reserve fuel
level, you will see a prompt asking
whether you wish to start the search for a
gas station ( page 336).
Y
Select the function and press W to confirm.
X
Switch the function on O or off ª.
Setting the volume manually
Adjust the volume using the q control
X
knob during a navigation announcement.
or
Select RPT in the map view with the menu
X
shown and adjust the volume using the q
control knob.
Announce Street Names
If the function is switched on, the name of the
street which you are turning into is
announced.
Announcements are not made in the chosen
language in all countries. They are made when
relevant street names for the selected lan-
guage are available in the database.
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV the COMAND controller and
press W to confirm.
Select Announce Street Names
X
W to confirm.
The function is switched on O or off ª,
depending on the previous status.
and press