Mercedes-Benz SL SERIES Operator's Manual page 331

Irrespective of the option, press W to con-
X
firm your selection.
The address entry menu appears again. The
intersection selected has been entered.
Start route calculation (
X
Starting route calculation
Address entry menu with destination address
Destination address
:
Starts route calculation
;
You can have COMAND calculate a route to
the destination address, or you can save the
destination address (for example, as your
home address (My address)) (
Call up the address entry menu
X
( page 324).
Y
In the address entry menu, confirm
X
by pressing W.
If no other route has been calculated, route
calculation starts immediately (option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
i
The Continue menu item is displayed
instead of Start if
tive Routes is activated in the navigation
menu (option 2) (
Y
Option 1 – no route guidance active: route
calculation starts. While route calculation is in
progress, an arrow will indicate the direction
to your destination. Below this, you will see a
message, e.g. Calculating Fast
Route....
Once the route has been calculated, route
guidance begins.
page 329).
Y
page 329).
Y
Start
Calculate Alterna‐
page 351).
If the vehicle is not on a digitized road, the
following is displayed:
the linear distance to the destination
R
the direction to the destination
R
the Off Mapped Road
R
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
to terminate the currently active route guid-
ance.
Select Yes or No and press W to confirm.
X
If you select Yes, COMAND will stop route
guidance and start route calculation for the
new destination.
If you select No, COMAND will continue
with the active route guidance.
i Route calculation takes a certain amount
of time. The time depends on the distance
from the destination, for example.
COMAND calculates the route using the
digital map data.
The calculated route can differ from the
ideal route, for example because of incom-
plete map data. Please also refer to the
notes about the digital map (
Entering and saving your home address
You can either enter your home address for
the first time (option 1) or edit a previously
stored home address (option 2).
Option 1: enter the address, e.g. a city,
X
street and house number (
After entering the address in the address
X
entry menu, select
and Z V Æ sliding the COMAND controller
and press W to confirm.
Select Save as "My Address"
X
W to confirm.
COMAND stores your home address as
Address in the destination memory.
Option 2: proceed as described under
X
"Option 1".
A prompt appears asking whether the cur-
rent home address should be overwritten.
Navigation
message
page 377).
Y
page 325).
Y
Save by turning c V d
and press
My
Z
329