Mercedes-Benz SL SERIES Operator's Manual page 501

and turning cVd the COMAND controller
and press W to confirm.
Select Active Aud./Vid. Source For
X
Rear and press W to confirm.
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
To switch off the function in COMAND:
X
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
Select the menu item at the bottom left,
X
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
Select Rear Audio/Video Off
X
press W the COMAND controller to con-
firm.
Selecting an active COMAND source on
the rear-compartment screen
Loading the active COMAND source
Rear Seat Entertainment System
Select
X
buttons on the remote control and press 9
to confirm.
The audio or video source selected in
COMAND is loaded in the Rear Seat Enter-
tainment System.
When the loading process is complete, the
audio or video source is set in the Rear Seat
Entertainment System.
If Rear Audio/Video Off
COMAND, the
is no active COMAND source
appears.
Audio CD mode
To select by skipping to a track: press
X
the = or ; button.
or
Press the E or F button.
X
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track.
If the elapsed track time is less than 8 sec-
onds, the function skips back to the begin-
ning of the previous track.
_ and
Additional setting option:
Adjusting the sound settings (
R
Audio DVD mode
To skip to the next/previous group:
X
press the : button on the remote con-
trol.
To select K L: highlight using the
X
= or ; button and press 9.
Additional setting option:
Adjusting the sound settings (
R
COMAND using the 9=;
is activated in
COMAND is off or there
499
message
page 489)
Y
page 489)
Y
Z