Mercedes-Benz SL SERIES Operator's Manual page 593

Do not start the engine when the vehicle is
R
raised.
Do not open or close a door or the trunk lid
R
when the vehicle is raised.
Make sure that no persons are present in
R
the vehicle when the vehicle is raised.
Using lug wrench :, loosen the bolts on
X
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
Mercedes-AMG vehicles and vehicles
with AMG equipment: to protect the vehicle
body, the vehicle has covers installed next to
the jacking points on the outer sills.
Changing a wheel
Mercedes-AMG vehicles and vehicles
X
with AMG equipment: fold cover ;
upwards.
Jacking point
=
Jack
?
Ratchet wrench
A
Position jack ? at jacking point =.
X
Make sure the foot of the jack is directly
X
beneath the jacking point.
591
Z