Mercedes-Benz SL SERIES Operator's Manual page 376

Navigation
374
To set the map scale: as soon as you turn
X
cVd the COMAND controller, the scale bar
appears. Turning clockwise zooms out from
the map; turning counter-clockwise zooms
in.
Turn cVd until the desired scale is set.
X
To apply a block: press W the COMAND
X
controller.
A red square appears on the map.
To adjust the size of the square: turn
X
cVd the COMAND controller.
The square is enlarged or reduced.
To confirm the settings: press W.
X
The list appears. The previously selected
area to be avoided has been added and
activated.
You can also determine additional areas to be
avoided ( page 374).
Y
Defining further areas
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Avoid Area
X
firm.
If you have already selected one or more
areas to avoid, a list of areas appears.
and press W to con-
Example: list of areas
i
Available positions in the list are named
Empty and are shown in grey.
Select Avoid New Area
X
the COMAND controller and press W to
confirm.
A menu appears.
Select Using Map,
X
Personal POIs and press W to confirm.
If you select Using
crosshair appears.
If you select From Memory
sonal POIs, either the destination mem-
ory or the list of categories for POIs
appears.
Destination memory (
R
List of categories for personal POIs
R
( page 344)
Y
Select the desired destination or personal
X
POI and press W to confirm.
When the destination address is displayed,
X
select Continue and press W to confirm.
The map appears.
by turning cVd
From Memory or From
Map, the map with the
or From Per‐
page 330)
Y