Mercedes-Benz SL SERIES Operator's Manual page 114

Seats
112
ment : up or down in the direction of the
arrow.
Moving the seats forward/back
G WARNING
When you adjust a seat, you or other vehicle
occupants could become trapped, e.g. on the
seat guide rail. There is a risk of injury.
Make sure when adjusting a seat that no one
has any body parts in the sweep of the seat.
! Make sure that there are no containers in
the cup holder and no objects in the foot-
well or behind the seats when adjusting the
seats. Otherwise, you could damage the
seats and the objects.
You can move the seat forwards in order to
gain better access to the rear compartment,
e.g. to reach the stowage compartment in the
rear ( page 516).
Y
Remove the seat belt from the seat belt
X
guide ( page 111).
Y
To move the seat forwards: press :
X
on switch :.
The seat moves automatically to the fore-
most position.
To move the seat backwards: press 9
X
on switch :.
The seat moves back to the previous posi-
tion.
To stop seat movement: press : or
X
9 in the opposite direction.
Adjusting the multicontour seat
You can set the multicontour seat using
COMAND ( page 316).
Y
Adjusting the active multicontour
seat
You can set the active the active multicontour
seat using COMAND (
Adjusting the 4-way lumbar support
You can adjust the 4-way lumbar support
using COMAND ( page 317).
Y
Switching the seat heating on/off
Switching on/off
G WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
Driver's and front-passenger seat
The three red indicator lamps in the button
indicate the heating level you have selected.
page 316).
Y