Mercedes-Benz SL SERIES Operator's Manual page 105

not place any objects on the cover
R
behind the roll bars
not allow the cargo to push the trunk
R
partition upwards
! Make sure the trunk separator is com-
pletely closed. Otherwise, the roof can be
blocked when it is opened or closed.
The trunk partition can be used to cover lug-
gage and loads in the trunk.
Opening and closing
Closed trunk partition
Trunk partition
:
Eyelets
;
Handle
=
To close: pull trunk partition : in the
X
direction of the arrow by handle =.
Hook trunk partition : into fastening eye-
X
lets ; in the side panels.
To open: remove trunk partition : from
X
fastening eyelets ; in the side panels.
Push trunk partition : against the direc-
X
tion of the arrow by handle =.
Removing and installing
Closed trunk partition
Trunk partition
:
Net
;
Eyelets
=
Handle
?
To remove: unhook net ; from the holder
X
on the left and right-hand sides and guide it
to the rear until it is completely rolled up.
Remove trunk partition : from fastening
X
eyelets = in the side panels.
Push trunk partition : against the direc-
X
tion of the arrow by handle ?.
Opened trunk partition
Trunk partition
:
Catch lever (example: driver's side)
A
Turn driver's side catch lever A in the
X
direction of the arrow.
Repeat the same process on the catch lever
X
on the passenger side.
Trunk partition : is unlocked.
Pull out trunk partition : in the direction of
X
the arrow.
Roof
103
Z