Mercedes-Benz SL SERIES Operator's Manual page 465

Option 1: enter the passkey (
X
After successful authorization, the Blue-
®
tooth audio device is connected and
starts playing.
Option 2 (Secure Simple Pairing): if the
X
digit codes displayed in COMAND and on
®
the Bluetooth audio device are the same,
confirm Yes by pressing W.
If you select Yes, authorization continues
®
and the Bluetooth
ted. Playback starts.
If you select No, authorization will be can-
celed.
i ®
The Bluetooth audio device must sup-
®
port Bluetooth version 2.1 for connection
via Secure Simple Pairing. COMAND cre-
ates a six-digit code, which is displayed on
both devices that are to be connected
External authorization
If COMAND does not find your Bluetooth
audio device, this may be due to particular
security settings on your Bluetooth
device. In this case, check whether your Blue-
®
tooth audio device can locate COMAND. The
®
Bluetooth device name of COMAND is
Bluetooth.
Switch on Bluetooth
X
( page 465).
Y
Select BT Audio by sliding VÆ and turning
X
cVd the COMAND controller and press W
to confirm.
Confirm Bluetooth Audio Device List
X
by pressing W the COMAND controller.
page 385).
Y
audio device is connec-
®
®
audio
MB
®
audio mode
To search: confirm
X
Audio Device by pressing the COMAND
controller W.
The duration of the search depends on the
number of Bluetooth
range and their characteristics.
To authorize: start the authorization on
X
®
the Bluetooth audio device, see the oper-
ating instructions of the Bluetooth
device.
After successful authorization, the Blue-
®
tooth audio device is connected and
starts playing.
i With some Bluetooth
playback must first be started on the device
itself so that COMAND can play the audio
files.
Reconnecting a Bluetooth
®
The Bluetooth audio profiles are connected
automatically under the following circum-
stances:
one of the last two mobile phones to have
R
been connected has also been used as a
®
Bluetooth audio player (if this function is
supported by the mobile phone).
the mobile phone takes over the automatic
R
connection itself.
®
A Bluetooth audio player without telephone
functions is not automatically reconnected,
even if it was the last device connected.
If the No Bluetooth Audio Device Con‐
nected message appears, you have two
options to connect a Bluetooth
device:
Connecting last device
Confirm Connect Last Device
X
basic display by pressing W the COMAND
controller.
If COMAND can locate the Bluetooth
audio device, it will be connected and start
playing.
i
With some Bluetooth
playback must first be started on the device
Audio
Connect via BT
®
audio devices within
®
audio
®
audio devices,
®
audio device
®
audio
in the
®
®
audio devices,
Z
463