Mercedes-Benz SL SERIES Operator's Manual page 367

Select a category, e.g. Home, and press W
X
to confirm.
The input menu appears with data fields
and the character bar.
Proceed as described under "Character
X
entry (navigation)" (
Then select ¬ and press W to confirm.
X
COMAND stores the destination under the
name entered.
An address with complete address data that
is suitable for navigation can be assigned to a
pre-existing address book entry.
To assign an address to an address
X
book entry: select
Book Entry and press W to confirm.
Select a category, e.g. Home, and press W
X
to confirm.
You will see the address book either with
the character bar or as a selection list.
Select an address book entry
X
( page 404).
Y
COMAND stores the data if the address
book entry selected does not yet contain
navigable address data.
If the selected address book entry already
contains navigable address data, a prompt
will appear asking whether you wish to
overwrite the existing data.
Select Yes or No and press W to confirm.
X
If you select Yes, COMAND stores the data.
You can now start route guidance to this
address directly from the address book
( page 406).
Y
To save the destination as My address:
X
select Save as "My Address"
W to confirm.
COMAND stores the destination in the des-
tination memory as
selected address book entry already con-
tains address data that can be used for
navigation (L icon), a prompt will appear
page 303).
Y
Assign to Address
and press
My Address. If the
asking whether you wish to overwrite the
existing data.
Select Yes or No and press W to confirm.
X
If you select Yes, the entry is overwritten. If
you select No, the process will be canceled.
To save the destination as a personal
X
POI: insert the SD memory card
( page 447).
Y
Select Save As Personal POI
X
W to confirm.
Select a category.
X
Enter the name.
X
The current address is saved as a personal
point of interest on the SD memory card.
Deleting a destination or the home
address
To switch to navigation mode: press the
X
Ø button.
To show the menu: press W the COMAND
X
controller.
Select Destination
X
tem menu bar by turning cVd the
COMAND controller and press W to con-
firm.
Select From Memory
X
firm.
You will see the destination memory list
either with the character bar (option 1) or
as a selection list (option 2).
Option 1: destination memory list with
X
the character bar: enter characters using
the character bar (
Option 2: destination memory list as
X
selection list: select a destination by turn-
ing cVd the COMAND controller and press
W to confirm.
You see the address data of the selected
entry.
Select Delete and press W to confirm.
X
A prompt appears asking whether you wish
to delete the destination.
Navigation
and press
in the navigation sys-
and press W to con-
page 303).
Y
Z
365