Mercedes-Benz SL SERIES Operator's Manual page 315

Importing/exporting data
Insert the SD memory card (
X
or
Connect a USB device (e.g. a USB memory
X
stick) ( page 447).
Y
Press W.
X
The system menu appears.
Select Settings by turning cVd the
X
COMAND controller and press W to con-
firm.
Select Import/Export Data
X
to confirm.
Select Import Data
X
press W to confirm.
page 447).
Y
and press W
or Export Data and
System settings
If PIN protection is activated, a PIN prompt
appears when you select
Enter the PIN, select¬and press W to
X
confirm.
You can now proceed in the same way as if
PIN protection was deactivated.
To select a preset: select
X
USB Storage and press W to confirm.
Select All Data and press W to confirm.
X
This function exports all the data to the
selected disc.
or
Select the data type and press W to con-
X
firm.
Depending on the previous entry, select the
data type for the export O or not ª.
Select Cont. and press W to confirm.
X
i
Personal music files in the MUSIC REGIS-
TER cannot be saved and imported again
using this function.
Reset function
You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. In addition, any activa-
ted PIN protection, which you have used to
protect your data against unwanted export,
will be deactivated. Resetting is recommen-
313
Export Data.
Memory Card or
Z