Mercedes-Benz SL SERIES Operator's Manual page 408

Telephone
406
Changing the category of a telephone
number data field
Display details for an address book entry
X
( page 405).
Y
Select the telephone number data field.
X
Select the list symbol to the right of the
X
entry by sliding VY the COMAND control-
ler and press W to confirm.
Select Change Category
X
confirm.
Select a number category, e.g. Home.
X
Select a telephone category, e.g. Mobile.
X
If desired, select
X
to confirm.
Depending on the previous status, switch
the option on O or off ª. The phone num-
ber is displayed as the first number in the
phone book and can be dialed immediately.
Select Save and press W to confirm.
X
The new category is stored.
Calling a number stored in an entry
Prerequisites
The mobile phone must be connected via the
®
Bluetooth Interface (
Dialing a number
Display details for an address book entry
X
( page 405).
Y
Select the phone number data field by turn-
X
ing cVd the COMAND controller.
Press W the COMAND controller to con-
X
firm.
or
Select the list symbol to the right of the
X
data field by sliding VY the COMAND con-
troller.
Press W the COMAND controller to con-
X
firm.
Select Call and press W to confirm.
X
The phone makes the call. The display
switches to telephone mode.
and press W to
Preferred and press W
page 383).
Y
Storing the phone number as a speed
dial number
Display details for an address book entry
X
( page 405).
Y
Select the phone number data field by turn-
X
ing cVd the COMAND controller.
Select the list symbol to the right of the
X
data field by sliding VY the COMAND con-
troller and press W to confirm.
Select Speed Dial
X
firm.
You can now store the number in one of the
ten speed dial presets (
Starting route guidance to an entry
Address book entry with navigable data
This function is available as soon as you have
stored a destination in the destination mem-
ory ( page 363).
Y
Search for an address book entry with the
X
L symbol and select it from the list
( page 404).
Y
Display details for an address book entry
X
( page 405).
Y
Select the address data field by turning
X
cVd the COMAND controller and press W
to confirm.
Route guidance begins.
or
Select the list symbol to the right of the
X
entry by sliding VY the COMAND control-
ler and press W to confirm.
Select Navigate and press W to confirm.
X
Route guidance begins.
Address book entry without navigable
data
Route guidance can also be started for an
address book entry without the L symbol. If
the address data or designations do not
match the digital map, COMAND prompts you
to re-enter the address.
and press W to con-
page 399).
Y