Mercedes-Benz SL SERIES Operator's Manual page 307

or
Select the 2 symbol in the character bar
X
and press and hold W the COMAND con-
troller until the entire entry is deleted.
To cancel an entry: select the & symbol
X
in the bottom left of the character bar and
press W to confirm.
or
Press the k back button.
X
The address entry menu appears.
To accept the first list entry: press and
X
hold W the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as a selection list
You can switch from the list of cities with the
character bar to the list of cities as a selection
list at any point during character entry.
Slide ZV the COMAND controller repeat-
X
edly until the city list appears as a selection
list.
Select the desired city from the selection
list.
or
Select¬in the character bar by turning
X
cVd the COMAND controller and press W
to confirm.
If there are several entries for a city or if sev-
eral cities of the same name are stored, then
¬ is highlighted in the character bar.
Press W the COMAND controller.
X
Option 2: city list as selection list
COMAND either shows the selection list auto-
matically or you can call up the selection list
from the list with the character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically.
Confirm NEW YORK
X
COMAND controller.
The address entry menu appears. You can
now enter a street, for example.
Observe the information on destination entry
( page 324).
Y
SPLITVIEW
Method of operation
SPLITVIEW allows you to simultaneously use
different COMAND functions on the front-
passenger side and on the driver's side. Dif-
ferent content is seen depending on your per-
spective when viewing the display.
The "Navi" function, for example, can be used
from the driver's side while a video is watched
from the front-passenger side.
SPLITVIEW is operated with the remote con-
trol from the front-passenger side.
To do so, use the special cordless head-
phones ( page 486). Using the headphones
Y
on the correct sides ensures an optimal
sound.
At a glance
by pressing W the
Z
305