Mercedes-Benz SL SERIES Operator's Manual page 440

Audio
438
You can switch off HD Radio™ in the radio
submenu:
Select Radio
X
VÆ the COMAND controller and press W
to confirm.
Select HD Radio
X
HD Radio™ on: O
HD Radio™ off: ª
i
Notes on HD Radio™:
HD Radio™ is a digital radio system from
the U.S.A. When HD Radio is off, you will
hear only analog programs on all frequen-
cies.
HD Radio™ provides:
digital transmission on the same wave-
R
bands as analog AM/FM. The analog
AM/FM stations remain in the same
position when selecting a station.
broadcasting of several program streams
R
over a single FM frequency (e.g. HD1,
HD2, etc.).
clear, interference free reception.
R
FM: CD quality sound.
R
AM: analog FM station sound quality.
the display of text-based information
R
(e.g. artist, track name) in the display
For further information on HD Radio™, visit
http://www.hdradio.com.
Switching wavebands
You can switch the radio between the FM, AM
and WB wavebands.
Waveband submenu
:
in the radio display by sliding
and press W to confirm.
Option 1: press the $ function button
X
until the desired waveband is set.
i
Repeatedly pressing this function button
switches through the wavebands in this
order: FM, AM, WB. You then call up satel-
lite radio mode. Pressing the button again
takes you back to FM radio mode.
Option 2: select FM,
X
display by sliding VÆ and turning cVd the
COMAND controller and press W to con-
firm.
The waveband submenu is opened.
X
Select a waveband and press W to confirm.
X
You will hear the last station played on the
selected waveband. The # dot shows the
currently selected waveband.
Selecting a station
Selects stations via the station search
function
Press the E or F button.
X
or
Turn cVd or slide XVY the COMAND con-
X
troller while the display/selection window
in the radio display is active.
Station search scans up or down and stops
at the next station found.
Selecting station via the station presets
Quick setting: press a number key, e.g.
X
l.
Directly in the station presets: select
X
Presets by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
or
When the display/selection window is
X
active, press W the COMAND controller.
The station preset memory appears. The
# dot indicates under which preset the
currently selected station is stored.
AM or WB in the radio