Mercedes-Benz SL SERIES Operator's Manual page 357

COMAND controller and press W to con-
firm.
Displaying and editing the recorded route
Insert the SD memory card (
X
Call up the Routes menu (
X
Select List in the Routes menu by turning
X
cVd the COMAND controller and press W
to confirm.
Previously recorded routes are displayed.
Select a route and press W to confirm.
X
The map appears with a menu. The recor-
ded route is shown in the map with a blue
dotted line.
To view a demonstration of the route on
X
the map: select Demo
COMAND controller and press W to con-
firm.
The map with the crosshair appears.
Proceed as described in the "Route dem-
X
onstration" section (
page 447).
Y
page 354).
Y
by turning cVd the
page 353).
Y
To begin route calculation: select
X
in the menu by turning cVd the COMAND
controller and press W to confirm.
COMAND attempts to align the recorded
route with the digital map.
Changing route names and icons
Select Edit in the menu by turning cVd
X
the COMAND controller and press W to
confirm.
To change the route name: select
X
and press W to confirm.
i
The name cannot be changed while the
vehicle is in motion.
To change the icon: select
X
and press W to confirm.
Observe the further information on managing
categories for personal POIs (
To change direction for route calculation:
you can set the icon for the route to the start-
ing point or to the destination, thereby chang-
ing the direction for route calculation.
During route calculation, one-way streets or
turn restrictions, for example, are taken into
account. Therefore, the outward and return
routes may differ from each other.
Select Swap in the menu by turning cVd
X
the COMAND controller and press W to
confirm.
Navigation
355
Start
Rename
Change Icon
page 342).
Y
Z