Mercedes-Benz SL SERIES Operator's Manual page 388

Telephone
386
Option 2: use Secure Simple Pairing
The mobile phone (or the Bluetooth
device) must support the Bluetooth
2.1 for connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on both devices that are to be con-
nected.
If the code is the same on both devices,
X
confirm Yes by pressing W.
If you select Yes, authorization is continued
and the mobile phone is connected.
If you select No, the process will be can-
celed.
Confirm the message on the mobile phone.
X
External authorization
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. In this case,
you can test if your mobile phone can find
COMAND. The Bluetooth
COMAND is MB
Please note the following: some mobile
phones require that you establish the con-
®
®
®
device name for
Bluetooth.
nection to COMAND again once you have
entered the passkey (see the mobile phone
operating instructions). The mobile phone
cannot otherwise be authorized.
Press the % function button on
X
COMAND.
Select Connect Device
X
phone basic menu by sliding V Æ and turn-
ing c V d the COMAND controller and
press W to confirm.
The Bluetooth
Select Connect via Phone
X
audio
to confirm.
version
The message on the left appears.
Start the Bluetooth
X
phone; see the mobile phone operating
instructions.
Select COMAND
X
mobile phone.
Option 1: when requested to do so, enter
X
the passkey first on the mobile phone and
then in COMAND.
Option 2: confirm the displayed codes on
X
the mobile phone and in COMAND (Secure
Simple Pairing).
With both options, you see the prompt
you want <device name> to be
authorized?
If you select Yes, the mobile phone will be
X
authorized. The messages
a Connection to//<name of B-tooth
dev.>... and
Profiles...
tion is successful, you see the telephone
basic menu and the connected mobile
phone is entered.
If you select No, the process will be can-
celed.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
Select the mobile phone in the Bluetooth
X
telephone list by turning cVd the
from the tele-
®
telephone list appears.
and press W
®
search on the mobile
(MB Bluetooth) on the
on the COMAND display.
Waiting for
Connecting Bluetooth
are displayed. If the connec-
Do
®