Mercedes-Benz SL SERIES Operator's Manual page 502

Rear Seat Entertainment System
500
MP3 mode
To select a track by skipping to a track:
X
press the = or ; button on the
remote control.
or
Press the E or F button.
X
The skip forward function skips to the next
track.
If the elapsed track time has exceeded 8
seconds, the function skips back to the
beginning of the track.
If the elapsed track time is less than 8 sec-
onds, the function skips back to the begin-
ning of the previous track.
To select a folder: press the : button
X
on the remote control.
Highlight one of the two folder symbols
X
with the = or ; button and press 9
to confirm.
Depending on your selection, the previous
or next folder is selected and the first track
is played.
Additional setting option:
Adjusting the sound settings (
R
Video DVD mode
To hide a menu: confirm
X
button.
The video image is played in full screen
mode.
Additional setting options:
Adjusting the brightness, contrast and
R
color ( page 489)
Y
Changing the picture format (
R
Adjusting the sound settings (
R
AUX mode
Introduction
You can connect one external video source to
each of the displays of the Rear Seat Enter-
tainment System (AUX display) and also one
external video source to the rear-compart-
ment CD/DVD drive (AUX drive) with a sound
and video signal.
Please see the corresponding operating
instructions for information on how to oper-
ate the external video source.
For further details about external video sour-
ces, please consult an authorized Mercedes-
Benz Center.
Connecting AUX equipment
AUX drive
The AUX drive jacks are located on the
CD/DVD drive next to the CD/DVD eject but-
ton (
Displaying AUX
The AUX display jacks are on the side of the
screen (
Audio and video connection
X
X
page 489)
Y
Activating AUX mode
Menu with the 9
AUX drive
X
X
page 490)
Y
X
page 489)
Y
page 485).
Y
page 484).
Y
Insert the audio plugs for the left and right
signals into the corresponding L and R
jacks.
Insert the video plug into the V jack.
Select Aux in the menu using the
9=; buttons on the remote
control and press the 9 button to confirm.
The AUX menu appears.
Select Source from the AUX menu and
press the 9 button to confirm.
Select Disc Drive Aux
button to confirm.
You will hear and see the content of the
external video source if it is connected to
the CD/DVD drive and switched to play-
back. If no video image is available from the
AUX source connected, you will see an
audio menu.
and press the 9