Mercedes-Benz SL SERIES Operator's Manual page 186

Table of Contents

Advertisement

Driving systems
184
To prevent damage to the vehicle, deacti-
vate DISTRONIC PLUS and the HOLD func-
tion in the following or other similar situa-
tions:
when towing the vehicle
R
in the car wash
R
If you fail to adapt your driving style,
DISTRONIC PLUS can neither reduce the risk
of accident nor override the laws of physics.
DISTRONIC PLUS cannot take into account
the road, traffic and weather conditions.
DISTRONIC PLUS is only an aid. You are
responsible for the distance to the vehicle in
front, for vehicle speed, for braking in good
time and for staying in your lane.
Do not use DISTRONIC PLUS:
in road and traffic conditions which do not
R
allow you to maintain a constant speed e.g.
in heavy traffic or on winding roads
on slippery road surfaces. Braking or accel-
R
erating could cause the drive wheels to lose
traction and the vehicle could then skid
when there is poor visibility, e.g. due to fog,
R
heavy rain or snow
DISTRONIC PLUS may not detect narrow
vehicles driving in front, e.g. motorcycles, or
vehicles driving on a different line.
In particular, the detection of obstacles can
be impaired if:
there is dirt on the sensors or anything else
R
covering the sensors
there is snow or heavy rain
R
there is interference by other radar sources
R
there are strong radar reflections, for
R
example, in parking garages
If DISTRONIC PLUS no longer detects a vehi-
cle in front, DISTRONIC PLUS may unexpect-
edly accelerate the vehicle to the stored
speed.
This speed may:
be too high if you are driving in a filter lane
R
or an exit lane
be so high when driving in the right-hand
R
lane that you overtake vehicles in the left-
hand lane
be so high when driving in the left-hand lane
R
that you overtake vehicles in the right-hand
lane
If there is a change of drivers, advise the new
driver of the speed stored.
Cruise control lever
Cruise control lever
To store the current speed or a higher
:
speed
To set the specified minimum distance
;
To store the current speed or call up the
=
last stored speed
To store the current speed or a lower
?
speed
To deactivate DISTRONIC PLUS
A
Activating DISTRONIC PLUS; storing,
maintaining and calling up a speed
Important safety notes
! If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl 400Sl 550

Table of Contents