Set Clock; Set Configuration - Symmetricom TimeProvider 100 User Manual

Chapter 5 CLI Commands
Set Commands

set clock

This command is used to set the system date and time in Universal Time
Coordinated (UTC).
Input:
tp100> set clock datetime ?
Response:
<datetime String 1 - 19> - format: yyyy-mm-dd,hh:mm:ss
Input:
tp100> set clock datetime 2008-11-19,20:52:00
Response:
Not allowed to set. GPS has been locked
tp100>

set configuration

This command is used to restore or save system configuration.
Input:
tp100> set configuration <tab>
Response:
restore
Input:
tp100> set configuration ?
Response:
restore
configuration
save
tp100> set configuration
Input:
tp100> set configuration restore <tab>
72 TimeProvider 100 User's Guide
save
- Set system configuration to backup or factory
- Save system configuration to FLASH
098-00106-000 Revision A – March, 2009