Chapter 5 CLI Commands
Show Commands
tp100>
show alarmconf
This command is used to display the entire alarm and event configuration.
Input:
tp100> show alarmconf
Response:
See
Table 4-2
show clock
This command is used to display the system date and time in Universal Time
Coordinated (UTC).
Input:
tp100> show clock
Response:
Date and time (UTC)
tp100>
show eia232
This command is used to display the RS-232 serial port parameters. Serial port
parameters are set at the factory and cannot be changed.
Input:
tp100> show eia232
Response:
---------------------------------------------------------------
|Baudrate
|Parity
|------------|------------|------------|-----------------------|
|9600
|none
---------------------------------------------------------------
tp100>
62
TimeProvider 100 User's Guide
for all alarms, events, default value, and configuration.
|Stop bit
|1
-
2008-11-18, 08:16:15
|Data length
|8
098-00106-000 Revision A – March, 2009
|
|