show gps
This command is used to display data related to GPS operations. It shows GPS
antenna angle mask, antenna cable delay, GPS time, and the position of the GPS
antenna.
Input:
tp100> show gps
Response:
GPS Information
GPS position mode
GPS elevation mask (degrees)
GPS antenna delay
GPS system time
Number of tracked satellite- 8
GPS latitude
GPS longitude
GPS height (meters)
tp100>
show image
This command is used to show the two firmware images and which one is currently
running.
Input:
tp100> show image
Response:
Active image -
Backup image -
Next boot image -
tp100>
098-00106-000 Revision A – March, 2009
- Survey (or Position Hold)
- 5
- 0.00000
- (in week, second format)
- N39:54:12.786
- E116:26:45.276
- 140.20
1, version 1.0.14
2, version 1.0.16
2
Chapter 5 CLI Commands
Show Commands
TimeProvider 100 User's Guide
63