Chapter 5 CLI Commands
Command Groups
reboot
This command is used to restart the system without disconnecting power.
Input:
tp100> reboot
Response:
A long sequence of startup messages will display. The process takes approximately
three minutes. When reboot is complete, the TimeProvider 100 prompt
displays.
upgrade
This command is used to download firmware to TimeProvider 100.
Input:
tp100> upgrade firmware tp100_upd_1.0.8.bz2,ftp:192.168.1.55,admin
Response:
tp100> password:
Response:
Upgrade is in progress...
############################################################
############################################################
############################################################
############################################
Upgrade is successfully completed
tp100>
60
TimeProvider 100 User's Guide
tp100>
098-00106-000 Revision A – March, 2009