tp100> set
Caution: After making configuration changes, you must use the set
configuration save CLI command to save the latest
configuration. See
information.
set alarmconf
This command is used to configure alarms. Events are hard coded and not
configurable.
Input:
tp100> set alarmconf code
Response:
<alarmcode Integer 0 - 19> - alarm unique ID
tp100> set alarmconf code
Input:
Response:
delay
tp100> set alarmconf code 0
Input:
tp100> set alarmconf code 0 ?
Response:
level
state
delay
transient - Is alarm transient: yes or no
tp100> set alarmconf code 0
098-00106-000 Revision A – March, 2009
set configuration
tp100> set alarmconf code 0 <tab>
level
state
- Alarm level: critical, major, minor or event
- Alarm state: disable or enable
- Alarm delay value: 0-1000 seconds
Chapter 5 CLI Commands
, on page 72 for more
<tab>
transient
TimeProvider 100 User's Guide
Set Commands
71